SENSORS & ELECTRODE CABLES

 

Gunjan Human Karigar offers a wide variety of physiological sensors and electrode cables. Because the NeXus product series has active amplifiers built into the encoder, you will only require our carbon coated electrode cables (with active shielding) for recording electrophysiological signals. Other modalities require sensors with dedicated electronics. For researchers: on request we also offer custom sensors or adaptors for third party sensors. Please contact us for more information.

Product Information
Click here for close up view
NeXus-10 EXG electrode cable
details
2 channel cable for EEG, EMG, ECG & EOG
This is a dual channel multi-purpose electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. This snap-on cable is suitable for recording EEG, EMG, ECG and EOG. Comes complete with a medical grade brushed metal connector. This cable requires the additional ground cable.

 
Product Information
Click here for close up view
NeXus-10 EEG electrode cable
details
2 channel cable for EEG & DC-EEG
This is a dual channel (bi-polar) EEG RING electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. It comes with sintered RING electrodes for optimum DC stability. The ring electrodes can be applied directly on the head (with paste) or snapped into the EasyCap EEG Cap.

Product Information
Click here for close up view
NeXus-10 SCP electrode cable
details
SCP (slow cortical potential) cable
This is an SCP electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. It comes with sintered RING electrodes for optimum DC stability. The ring electrodes can be applied directly on the head or snapped into the EasyCap EEG Cap.

Product Information
Click here for close up view
NeXus-10 RSP Sensor
details
Respiration Sensor
The Respiration sensor monitors abdominal or chest breathings with high accuracy. It can be easily worn over or under the clothes, This sensor offers such high sensitivity that you can even observe the heart beat with it. Like all neXus-10 sensors it comes with a medical grade brushed metal connector.

Product Information
Click here for close up view
NeXus-10 Temperature Sensor
details
High Resolution Skin Temperature
In combination with the NeXus-10, this highly sensitive temperature sensor can monitor skin temperature changes smaller than 0.0001 (1/10000th) degree! The sensor can be applied on the hands or other parts of the body. The medical grade brushed metal connector ensures a safe and reliable connection.

Product Information
Click here for close up view
NeXus Force Sensor
details
Force Sensor  (50N, 500N or 5000N)
We offer this special series of 'force' sensors for the NeXus 10, 16 and 32. You can choose from a force range of 0-50 Newton, 0-500 Newton or 0-5000 Newton. Very sturdy design. The 24 bit design of NeXus provides high precision and reliable signals. Comes complete with a medical grade brushed metal connector and precision amplifier.

 
Product Information
Click here for close up view
NeXus-16/32 EXG cable
details
1 channel cable for EEG, EMG, ECG & EOG
This is a multi-purpose bi-polar electrode cable for the NeXus-32 and NeXus-16 that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. This snap-on cable is suitable for recording EEG, EMG, ECG and EOG. (ground ref. cable required)

Product Information
Click here for close up view
NeXus-10 EXG ground cable
details
Ground cable for EEG, EMG, ECG, EOG, SCP
This electrode cable with carbon coating is used for connecting the encoder ground to the client. When recording electrophysiological signals (EEG, EMG, ECG, EOG or SCP) a single ground is always required. This ground cable can be used in combination with the EXG or the SCP cable. Connect it to the Gnd. input of the NeXus-10, NeXus-16 or NeXus-32.

Product Information
Click here for close up view
NeXus-10 EEG ground cable
details
Ground cable for EEG, DC-EEG & SCP
This RING electrode cable with carbon coating is used for connecting the encoder ground to the client. When recording DC-EEG signals (SCP) a single ground is always required. This ground cable can be used in combination with the EEG or the SCP cable. The ring electrode can be applied directly on the head (with paste) or snapped into the EasyCap EEG Cap.

Product Information
Click here for close up view
NeXus-10 SC/GSR Sensor
details
SC/GSR Sensor
This is the NeXus-10 Skin Conductance sensor capable of recording the electrical conductance or resistance (GSR) of the skin. With the ultra high 24 bit resolution of the NeXus it can resolve changes of less than 0.0001 microsiemens. Two finger sensors are included.

Product Information
Click here for close up view
NeXus-10 BVP Sensor
details
Blood Volume Pulse Sensor
This BVP sensor monitors the relative blood flow in the hands (fingers) with near infrared light. This method is also know as photoplethysmography. (PPG) From the pulse signal the software can compute the heart rate.  This sensor can be used to monitor HR, HRV (heart rate variability), bloodflow and pulse.

Product Information
Click here for close up view
Nonin Oximetry Sensor
details
Oximetry Sensor
This Oximetry Sensor can be used with the NeXus-10, NeXus-16 or neXus-32. It provides digital readings of the relative oxygen saturation level in the blood. It also provides pulse and heart rate information. The 4 pin brushed metal connector ensures a safe and reliable connection.

Product Information
Click here for close up view
Ring Electrode Set (22 pcs)
details
QEEG sintered Electrode Set
This is a special set of 22 uni-polar electrode cables that use carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. The micro-coax connectors fit on the NeXus-16 and NeXus-32 EEG inputs. The sintered (Ag/AgCl) ring electrodes can be used as is, or in combination with the EasyCap EEG cap.

 
Product Information
Click here for close up view
NeXus-16/32 AUX Sensors
details
NeXus-16 & NeXus-32 Auxiliary Sensors
These sensors are the equivalents of the above NeXus-10 sensors, except that another type of connector is used. Supported types are: SC/GSR, BVP, Respiration, Temperature and Force. NeXus-16 and 32 can be configured to accept up to 16 or 32 EXG or auxiliary channels or a mix of sensors.

 
2007 © Copyright HumanKarigar
All rights reserved.